Solve Ip Helper Service Using High Cpu Memory

Show more

Solve Ip Helper Service Using High Cpu Memory - IP Helper Service (iphlpsvc.exe) is also known as the Internet Protocol Helper (IP Helper) service. It is pre-installed on every Windows 10 operating system. Windows 10 has many services and processes that work behind the scenes to enable the functioning of all peripheral devices and embedded programs. The IP Helper Service is responsible for the network configuration management system on the local computer, such as configuring backups, troubleshooting, tracking user activity, changes and compliance.



What is IP Helper Service Process

IP Helper Service is completely safe to use and can be found in your Task Manager. These services take up part of your system memory and can perform important functions for your computer. This is a service that provides tunnel connectivity via HTTP, Proxy Port, ISATAP, and Teredo tunneling.

IP Helper Service is a service that is not commonly used on your computer system. In Windows 10, it is possible to enable and disable these services from your computer system. This software is mostly useful for those who use advanced connectivity services to Windows OS like Homegroup or IPv6.


Ip Helper Service Using High Cpu Memory

IP Helper Service as mentioned above is mainly concerned with local computer network configuration and management. To fulfill this purpose, it uses adapters and interfaces or interfaces. Its main function is to provide a different management information system by performing one-to-one mapping between adapters and interfaces. The involvement of the adapter device requires WAN (Wide Area Network) connectivity. Therefore, IP Helper Service uses internet data to carry out management information system functions.

Many users complain about high memory consumption after IP Helper Service is enabled in the system. This happens because some IP Helper Service programs use parameters such as management information-based technology. This structure is used to offer various network credentials such as ARP Cache entries. The involvement of such heavy structures results in high memory consumption.

If the IP Helper Service (iphlpsvc.exe) process is using high memory and internet data on your PC, you can run System File Checker, DISM, or disable this service.


How to Enable or Disable IP Helper Service

The following are some ways you can do to enable or disable the IP Helper Service. Let's look at each method in detail.


Via Services Manager

Follow the steps below to enable or disable IP Helper Service on your Windows 10 or Windows 11 PC.


  • Press Win key + R, then type services.msc and press Enter to open Services.
  • In the Services window, find the IP Helper service in the right pane and double-click on it to open its properties window.
  • In the properties window, on the General tab, click the Startup type drop-down menu and select Automatic.
  • Next, click Start in the Service status section to activate it.
  • Meanwhile, to disable this particular service, click the Stop button.
  • After that click Apply and OK to save the changes.
  • You can now exit the Service window.


Via Command Prompt

To do this using the Command Prompt, follow the steps below.


  • Press Win + R key, then type cmd and press Ctrl + Shift + Enter to open Command Prompt with admin rights.
  • In the Command Prompt window, enter the command below and press Enter to activate the IP Helper service.

net start iphlpsvc

 

  • To disable the service, enter the command below and press Enter.

net stop iphlpsvc


You cannot start this service if the Startup type is set to Disabled. So to change the Startup type of the same service, you can run the following command in the Command Prompt.

Automatic:

REG add “HKLM\SYSTEM\CurrentControlSet\services\iphlpsvc” /v Start /t REG_DWORD /d 2 /f


  • Manuals:

REG add “HKLM\SYSTEM\CurrentControlSet\services\iphlpsvc” /v Start /t REG_DWORD /d 3 /f


  • Automatic (Delayed Start):

REG add “HKLM\SYSTEM\CurrentControlSet\services\iphlpsvc” /v Start /t REG_DWORD /d 2 /f


  • Disabled:

REG add “HKLM\SYSTEM\CurrentControlSet\services\iphlpsvc” /v Start /t REG_DWORD /d 4 /f



Enable or Disable IP Helper Service Via Registry Editor

Since this is a registry operation, it is recommended that you back up the registry or create a system restore point as a necessary precaution. Once done, you can proceed with the following steps.


  • Press Win + R keys, then type regedit and press Enter to open the Registry Editor.
  • In the registry editor window, navigate to the following registry key path.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\iphlpsvc

  • In the location, in the right pane, double-click the Start entry to edit its Value data.
  • In the DWORD edit window, set the value data to the following as per your requirement.

Automatic: 2

Manual: 3

Disabled: 4

Automatic (Delayed Start): 2

  • After this click OK to save changes.


Via System Configuration

To do this using System Configuration, follow these steps.

  • Press the Win + R key, then type MSConfig and press Enter to open System Configuration.
  • In the System Configuration window, switch to the Services tab.
  • To activate the IP Helper service, check the IP Helper box, then click Apply and OK.
  • To disable the IP Helper service, uncheck the IP Helper box, then click Apply and OK.
  • After that restart your device.

Restarting the device is necessary for this method as changes will be made accurately after reboot.


Is it Safe to Disable IP Helper Service?

IP Helper Service is not used in your daily life. Disabling such services will not affect your system much unless you are using a remote database. Disabling this service will disable the Tunnel service on your computer along with advanced connectivity services. Since this feature is not commonly used, it is very safe to disable it on your computer to create more space in your system memory.

Disabling this service will not affect your system unless you are running a remote database or you need tunnel connectivity. On the other hand, it is often considered effective because iphlpsvc consumes a lot of memory among all other resources.

You can disable the IP Helper Service using Services, Command Prompt, Registry Editor, or System Configuration. If you wish to disable this service through the Services window, open Services from the Start menu, then find and double-click IP Helper Service, and click Stop. You may also have to check the service dependencies and then disable them as well.

Since this service is pre-installed with Windows 10 OS, the biggest disadvantage of this service is a large amount of space and resource consumption without being used regularly by the system. Removing these services helps in increasing processor performance. The processing unit has increased memory and efficiency.


Sometimes IP Helper Service Crashes 

IP Helper Service works on the Svchost.exe process. Performance can be tracked using Performance Monitor. However, the problem mostly occurs in this type of setting change which can also cause memory leaks and other crash issues. It occurs when the application does not free the required memory size for the program to function.

The best part is that the service manages to call back after the changes are complete. In case of changes and problems, queries can be submitted on the Windows filtering platform


Next Post Previous Post
No Comment
Add Comment
comment url